Shop Pump Float Switches for Water Tanks Online
Y-FSK-1 – Pump Float Switch 10amp, 240v, 3wire 10m lead (includes weight)
Do you need your submersible pump to turn off and on automatically? Then you need a submersible pump float switch. When your water tank is full, the float switch rises and cuts off the electrical signal, shutting off the pump. As the water level falls, the float switch reconnects with the circuit, turning the pump back on to re-fill your tank.
A float switch prevents your tank from overflowing. Alternatively, it can be set up to turn on the pump to prevent the tank from running dry. The switch can be set to turn on or off when full. It’s your choice – and you select the trigger water level.
Foundation Pump Services is a West Australian-based pump servicing company with successful partnerships with factories from different parts of the world, including big countries like the USA, China, etc. Our company offers products that are specifically designed to suit Australian climatic conditions. Foundation Pump Services began as Combined Australian State Importing (CASI). Our company is located in Balcatta.
Our products include pumps, pump accessories, water filtration, and purification products, and fitting capacitors. Our customers can find almost all varieties of pumps, including centrifugal/reticulation/ pressure pumps, submersible drainage, sewage/ wastewater/sump pumps, vertical multistage pumps with motors; pool pumps, diaphragm/dosing pumps, circulator pumps; fire and transfer pumps, and magnetic drive polypropylene pumps listed on our site. Our company is set up for extraction and installation of pumps and a service vehicle with a winch for field jobs such as lifting bore submersible pumps. There is also a product pump float switch for water tanks. Our offering Y-FSK-1 – Pump Float Switch is one of the best products that you can find in the market for your use.
A pump float switch is a type of level sensor, a device used to detect the level of liquid within a tank. It can be used to control a pump, as an indicator, as an alarm, or control other devices. A type of pump float switch uses a mercury switch inside a hinged float. The working of the pump float switch is quite simple. The pump turns itself off and on, depending on the situation. This small device is enclosed in a waterproof case to turn a pump on and off relative to the water.
Pump Float Switches for Water Tanks in Australia
In house sewerage systems, you will have three chambers wherein the grey water passes through the first two chambers for treatment. The treated water then overflows into the third chamber, which contains the pump float switch. Pump float switches for water tanks help in managing storage tank systems. The float switch can be used to manage any kind of liquid level may, whether it be water or oil. It helps in operating the equipment and also will help in protecting the equipment that may get damaged by improper operation. The important question now is, how will you know it’s working? There’s a Multimeter that leads to the float switch wires. Once the level of liquid starts rising, the reading will change from zero to one. Most pumps will not turn on until there is an inch or two of water in the pit. It is very common to see some water at the bottom of the pit even when the pump is off since it often shuts off when a little bit remains. A pump float switch, commonly installed in a closed position, detects a rise in water in a sump pump. The electric circuit will close when the water rises. This will allow the current to pass to signal a pump-to-pump water out of the tank. The uses of Pump switches extend to several industries in Australia.
Still, have queries about our Y-FSK-1 – Pump Float Switch offerings? Connect with us at your convenience.
