Grundfos SCALA1 Self Priming Fixed Speed Booster Pump with Bluetooth
The GRUNDFOS SCALA 1 is a robust all-in-one, self-priming pump with built-in Bluetooth® connectivity, making it simple to install, trouble shoot and customise using the GRUNDFOS GO App. SCALA1 is self-priming allowing it to be connected to either above ground or below ground (up to 8m) water sources.
- Compact easy to install due to flexible and removeable inlet and outlet connections
- Easy to commission using Bluetooth® connection to GRUNDFOS GO App.
- Self-Priming up to 8m (with foot valve).
- Efficient and quiet water cooled motor is cooled by the pumped liquid.
- Join 2 pumps together for a Twin Booster.
The Grundfos SCALA1 is a fully integrated, all-in-one, self-priming, compact waterworks designed for pressure boosting in domestic and light-commercial applications, such as garden irrigation or pressure boosting to one and two family houses and apartments.
- Liquid temperature: 0°C-+45°C
- Ambient temperature: 0°C-+55°C
- Supply voltage: 1 x 240 Volt 50 Hz
- Enclosure class: Suitable for outdoor installation (IP X4D)
- Noise pressure level: Low noise levels (55 dB(A) max.)
Designed for pressure boosting in domestic installations. Use SCALA1 for:
- pumping from a roof tank, break tank or ground tank
- water supply from shallow wells (less than 8 m.)
- pressure boosting from city mains water.
For domestic pressure boosting, you get water on demand for:
- taps and showers in the home
- garden and lawn irrigation.
In addition, SCALA1 is the perfect pressure boosting solution for light commercial applications as greenhouses, irrigation, car wash and produce (fruit and vegetable) section in supermarkets.
If greater flow is required, this is easily done in a twin pump setup with the available accessories (including baseplate, cable and inlet and outlet manifolds).
Therefore installation and commissioning is easy. The Grundfos GO REMOTE app shows alarm status and get easy pump diagnostics. You can create and email reports onsite and access hard-to-reach installations remotely from the app.
Save time installing SCALA1 – simply connect the pipes, prime the pump and plug it in. For fast and easy commissioning, configure the pump quickly and intuitively directly from the pump control panel.